Engineered water and pumping systems
Complete systems designed around how you use water: assessed, specified, installed and commissioned as one job.
One team for the whole system
When the problem is bigger than one pump, the answer is a system: source, pump, controls, pipework and storage working together. We design it from your operating requirements, then supply, install and commission it.
Select a numbered part in the diagram to see what each piece does and what we check.
The parts we specify and install
Select a number on the diagram or in the list. Illustrative: every installation differs.
- 1Suction valve and strainer
An isolation valve lets the pump be serviced without draining the system. A strainer keeps debris out of the pump.
- 2Pump
The casing and impeller are chosen for the flow and head the system needs. Seals and wear parts are the main service items.
- 3Motor
Sized for the power the pump needs across its working range, with the right protection and cooling for the site.
- 4Controls and drive
A starter, soft starter or variable speed drive, with protection against dry running, overload and phase faults.
- 5Discharge valve and gauge
A non-return valve stops back-flow. Isolation, a pressure gauge or transmitter and surge protection are added where the system needs them.
- 6Tank or network
The storage or pipework the pump serves. Level or pressure signals feed back to the controls.
What we design and install
Borehole and submersible pumpingPumps, controls and rising mains for boreholes.Explore
Booster and pressure systemsSteady water pressure for buildings and sites.Explore
Solar pumpingPumping powered by the sun, with storage.Explore
Water storage and distributionTanks, level control and pipework that keep supply steady.Explore
Industrial process waterTransfer and process-water systems built for reliability.ExploreFrom assessment to handover
- 01
Assess
We measure the site, the source and the demand.
- 02
Design
We size equipment and pipework and agree the specification.
- 03
Install and commission
We build it, test it and set the controls.
- 04
Hand over and support
We train your team and agree the maintenance plan.
What we build into every system
- Equipment sized for the duty, not for a catalogue
- Protection against dry running, overload and surges
- Isolation valves so parts can be serviced without a shutdown
- Standby pumps where downtime is costly
- Clear documentation and a maintenance plan
- A named contact for the project
From the plant room to the storage tank
Plant-room pipework
Storage tanksPipework into a building
Elevated storageIndustries that rely on this
Frequently asked questions
Who is responsible for the whole job?
For engineered systems we aim to give you one accountable contact at Pumpro from assessment to handover.
Can you work with my contractor or consultant?
Yes. We supply specified pumping packages and technical support to contractors, developers and consultants as well as direct to site owners.
How long does a system take?
It depends on size and site. We give a programme with the quote so you know the timing before you commit.
Tell us about your water system
Whether you know the pump you need or only know something is wrong, we will help you find the right next step.